а что это за игра?mark2580 писал(а):<...>
И так, заявляю, что рип с DeepSilver_овского двигла нинзей возможен. Ниже доказательства.
В игре - https://imgur.com/tvBbbM9
Рипнутый меш, собранный из кусков - https://imgur.com/zfM98Gz
Ninja Ripper
- Tosyk
- Администратор
- Сообщения: 1880
- Зарегистрирован: 24 авг 2011, 03:11
- Благодарил (а): 64 раза
- Поблагодарили: 61 раз
Re: Ninja Ripper
При копировании материалов сайта ссылка на этот ресурс обязательна.
When copying materials from this site link to this resource is required.
When copying materials from this site link to this resource is required.
- evrazik
- Прохожий
- Сообщения: 1
- Зарегистрирован: 10 дек 2018, 11:26
- Откуда: Frostpeak
- Благодарил (а): 0
- Поблагодарили: 0
Re: Ninja Ripper
Ищу способного рипнуть модель со скетчфаба для 3dsmax:
https://sketchfab.com/models/d4e49cce7d ... ef=related
https://sketchfab.com/models/d4e49cce7d ... ef=related
- mark2580
- Продвинутый
- Сообщения: 84
- Зарегистрирован: 28 окт 2015, 07:56
- Откуда: Киров
- Благодарил (а): 0
- Поблагодарили: 0
Re: Ninja Ripper
Судя по виду это какой-то 3D скан, даже обычные модели через бубен и пляски у костра еле достают, потом правлят... то тут изначальное месево из полигонов, советую забыть о этой модели.evrazik писал(а):Ищу способного рипнуть модель со скетчфаба для 3dsmax:
https://sketchfab.com/models/d4e49cce7d ... ef=related
Да и там о ужс 3.2 ляма полигонов.
MARK2580
-
- Прохожий
- Сообщения: 3
- Зарегистрирован: 10 янв 2018, 04:01
- Благодарил (а): 0
- Поблагодарили: 0
Re: Ninja Ripper
а что за бубен и пляски можно подробнее пожалуйста?)mark2580 писал(а):Судя по виду это какой-то 3D скан, даже обычные модели через бубен и пляски у костра еле достают, потом правлят... то тут изначальное месево из полигонов, советую забыть о этой модели.evrazik писал(а):Ищу способного рипнуть модель со скетчфаба для 3dsmax:
https://sketchfab.com/models/d4e49cce7d ... ef=related
Да и там о ужс 3.2 ляма полигонов.
-
- Прохожий
- Сообщения: 1
- Зарегистрирован: 14 фев 2019, 15:27
- Благодарил (а): 0
- Поблагодарили: 0
Re: Ninja Ripper
Доброго времени суток, подскажите пожалуйста можно ли подцепить модельку отсюда www.heroforge.com ?
- Tosyk
- Администратор
- Сообщения: 1880
- Зарегистрирован: 24 авг 2011, 03:11
- Благодарил (а): 64 раза
- Поблагодарили: 61 раз
Re: Ninja Ripper
кто знает, пока не попробуешь не скажешьIlnorreed писал(а):Доброго времени суток, подскажите пожалуйста можно ли подцепить модельку отсюда http://www.heroforge.com ?
При копировании материалов сайта ссылка на этот ресурс обязательна.
When copying materials from this site link to this resource is required.
When copying materials from this site link to this resource is required.
-
- Прохожий
- Сообщения: 2
- Зарегистрирован: 08 фев 2019, 10:12
- Благодарил (а): 0
- Поблагодарили: 0
Re: Ninja Ripper
Hi everybody,
First of all i am sorry i dont kwow russian. I ve tried succesfully the blender plugin method. I had a few problems unpacking the .gz from the ske***b website. Finally i ve used the "download master" software that unzip the files correctly. I dont like this software (downl master) because it too intrusive and dont work very well. I ve tried to unzip with winrar and some others but always failed. I ve tried changing the *.gz extension but bender plugin dont do anything with the files. So if u know another tool to unpack this kind of .gz file or whatever this file system is i will be much apreciated.
Its .blend file so you can open it with blender that is freeware and then export to whatever format you want. The file is heavy, like 341mb so it will be slow. Moreover the textures are missing because of the extraction method. Hope u find it usefull.
regards
First of all i am sorry i dont kwow russian. I ve tried succesfully the blender plugin method. I had a few problems unpacking the .gz from the ske***b website. Finally i ve used the "download master" software that unzip the files correctly. I dont like this software (downl master) because it too intrusive and dont work very well. I ve tried to unzip with winrar and some others but always failed. I ve tried changing the *.gz extension but bender plugin dont do anything with the files. So if u know another tool to unpack this kind of .gz file or whatever this file system is i will be much apreciated.
Here is the modelmark2580 писал(а):Судя по виду это какой-то 3D скан, даже обычные модели через бубен и пляски у костра еле достают, потом правлят... то тут изначальное месево из полигонов, советую забыть о этой модели.evrazik писал(а):Ищу способного рипнуть модель со скетчфаба для 3dsmax:
https://sketchfab.com/models/d4e49cce7d ... ef=related
Да и там о ужс 3.2 ляма полигонов.
Код: Выделить всё
https://mega.nz/#!pF5AVSoA!1fbi_c0PFbGcdU-SkPPQhAfWX1pzLN4PtggNz25RGOk
regards
- Andrakann
- Ветеран
- Сообщения: 253
- Зарегистрирован: 07 фев 2012, 17:29
- Откуда: Таганрог
- Благодарил (а): 1 раз
- Поблагодарили: 1 раз
- Контактная информация:
Re: Ninja Ripper
Hi!juan1985 писал(а):Hi everybody,
First of all i am sorry i dont kwow russian. I ve tried succesfully the blender plugin method. I had a few problems unpacking the .gz from the ske***b website. Finally i ve used the "download master" software that unzip the files correctly. I dont like this software (downl master) because it too intrusive and dont work very well. I ve tried to unzip with winrar and some others but always failed. I ve tried changing the *.gz extension but bender plugin dont do anything with the files. So if u know another tool to unpack this kind of .gz file or whatever this file system is i will be much apreciated.
There are only two states for downloaded files - GZipped or already unpacked by browser.
Open file.osgjs.gz with Notepad, and if you see text sript - it's already unpacked, and you only need to remove ".gz" ending of all file names.
Pale Moon browser can download GZipped files (without unpacking), just like old Firefox.
7Zip and WinRAR can unpack any GZip (if your files really packed).
-
- Прохожий
- Сообщения: 2
- Зарегистрирован: 08 фев 2019, 10:12
- Благодарил (а): 0
- Поблагодарили: 0
Re: Ninja Ripper
I ve tried 7zip and now it works! thank youHi!
There are only two states for downloaded files - GZipped or already unpacked by browser.
Open file.osgjs.gz with Notepad, and if you see text sript - it's already unpacked, and you only need to remove ".gz" ending of all file names.
Pale Moon browser can download GZipped files (without unpacking), just like old Firefox.
7Zip and WinRAR can unpack any GZip (if your files really packed).